The steps to install the new Tianli hand-cranked gear are as follows:
Prepare tools: Confirm the required tools, usually including wrenches, screwdrivers, etc.
Determine the installation position: Determine the suitable installation position according to the equipment or machinery that needs to install the hand-cranked gear.
Install base: Fix the base of the hand-cranked gear in the installation position. Use a screwdriver or wrench to tighten the screws to ensure that the base is stable.
Install gear: Insert the gear part of the hand-cranked gear into the base and ensure that the gear is firmly connected to the base.
Adjust Position: Adjust the position and angle of the hand crank gear as needed to ensure easy and comfortable operation.
Fixed Screws: Use a screwdriver or wrench to tighten the screws on the base to ensure that the hand crank gear is firmly fixed in the installation position.
Test Operation: After the installation is completed, carry out the test operation to ensure that the hand crank gear can operate normally and there is no loosening or abnormality.
Please note that during the installation process, ensure the safe operation and operate according to the specific hand crank gear model and instructions. If you are not sure how to install or operate, please consult a professional or contact the relevant technical support.
How to Install the Tianli Prefilter?
The installation method of Tianli pre-filter needs to pay attention to several steps. Because Tianli pre-filter is a device that purifies household tap water, the correct installation method can make it work normally and achieve the effect of purifying water quality. The installation method of Tianli pre-filter probably has the following steps: 1. To determine the installation location of Tianli pre-filter, a suitable position upstream of the water inlet pipe section should be selected, so that the best water purification effect can be achieved. 2. Connect the connection pipe between the Tianli pre-filter and the water inlet pipe section, and ensure the tightness of the connection pipe to avoid leakage. 3. Set the filtration parameters of the Tianli pre-filter, such as filter thickness, filter material, etc., and choose according to the actual situation. 4. Test the Tianli pre-filter to check whether there is water leakage and whether it works normally to ensure that the installation effect is correct.
How to connect the Tianli Shield smart lock 9300 to the Internet?
The method of connecting the Tianli Shield smart lock 9300 to the Internet is to connect to the WiFi network and use the mobile APP for setting and control. First, download and install the APP of the Tianli Shield smart lock on the mobile phone, then plug the plug of the smart lock into the power supply, press the SET button on the lock body, wait for the lock body to emit a prompt sound, open the APP and select Add lock device, follow the prompts to set the WiFi network connection, and finally complete the network setting. After successful networking, users can realize functions such as remote control, password setting, and viewing unlocking records through the APP.